• Product Knowledge
MESSAGE
Submit
Where is a Duplex UNS S32205 shell and tube heat exchanger commonly used?
Time :Jul 08, 2026

A Duplex UNS S32205 shell and tube heat exchanger is commonly used in industries where the fluid contains chlorides, seawater, brine, weak acids, or other corrosive media. Compared with 304/316L stainless steel, Duplex 2205 offers higher strength and better resistance to chloride stress corrosion cracking, so it is often selected for harsher cooling, heating, condensation, and heat recovery duties.

Where is a Duplex UNS S32205 shell and tube heat exchanger commonly used?

In marine and offshore applications, it is used for seawater coolers, central freshwater coolers, lube oil coolers, jacket water coolers, and other shipboard shell and tube heat exchangers. Marine systems often use seawater as the cooling medium, so Duplex UNS S32205 is suitable for parts exposed to chloride-rich water, such as tubes, tube sheets, channels, and nozzles.

In oil and gas facilities, Duplex UNS S32205 shell and tube heat exchangers are used for process cooling, gas cooling, condensate cooling, glycol cooling, produced-water cooling, and offshore platform utility systems. These applications often require both corrosion resistance and mechanical strength because the equipment may handle wet gas, chloride-containing water, CO₂-containing fluids, or high-pressure service.

In chemical processing plants, they are used as process coolers, heaters, condensers, reboilers, solvent coolers, and acid/alkali service heat exchangers. Duplex UNS S32205 is suitable when the process fluid is more corrosive than standard stainless steel can reliably handle, but not so severe that titanium, Hastelloy, or Super Duplex 2507 is required.

In desalination and brine systems, Duplex UNS S32205 shell and tube heat exchangers are used for brine cooling, seawater preheating, RO feedwater systems, and evaporator or condenser service. These systems often contain high-chloride water, so material selection is critical for long service life.

In power plants, Duplex UNS S32205 can be used for closed cooling-water exchangers, feedwater heaters, auxiliary coolers, turbine lube oil coolers, and flue gas scrubber-related heat exchangers. It is especially useful where cooling water quality is poor, where chloride content is high, or where carbon steel and ordinary stainless steel have corrosion problems.

In wastewater treatment and environmental systems, Duplex UNS S32205 shell and tube heat exchangers are used for sludge heating, wastewater cooling, chemical dosing systems, heat recovery, and corrosive effluent treatment. These systems may contain chlorides, suspended solids, chemicals, and unstable water quality, so a stronger corrosion-resistant alloy helps reduce leakage and maintenance.