What are the Limitations of Temperature Differences between Tube and Shell Streams in Shell and Tube Heat Exchangers?
In a shell and tube heat exchanger, the temperature difference between the tube and shell stages is usually limited by the following factors:
Thermal expansion properties of the material: Excessive temperature differences can lead to large differences in the degree of thermal expansion of components made of different materials. For example, if the temperature difference between the connection area of the tube plate and the heat exchanger tube is too large, excessive thermal stresses may occur due to inconsistent thermal expansion, which may lead to connection failure or damage.
Sealing performance: A large temperature difference will affect the performance of the sealing material and the sealing effect. Seals may lose their sealing effect due to uneven thermal expansion and contraction, leading to leakage.
Structural strength of the equipment: Extreme temperature differences may cause the structure of the equipment to be subjected to excessive thermal stresses, exceeding its design strength, which may lead to deformation or even rupture.
Generally speaking, for common shell-and-tube heat exchangers, there is no fixed absolute limiting value for the temperature difference between the tube and shell processes, but it depends on the specific design, materials and working conditions.
In practice, if the temperature difference is large, special design measures may be required, such as selecting materials with similar coefficients of thermal expansion, adding expansion joints, optimising the structural design, etc.
As an example, in some chemical production processes, the shell process of the medium temperature may be about 200 ℃, while the tube process of the medium temperature of about 50 ℃, this temperature difference in the reasonable design and selection of materials can be normal operation. However, if the temperature difference increases further, for example, if the shell stroke reaches 500°C and the tube stroke remains at 50°C, more complex design improvements to the equipment may be required.
